Member-only story

Step-by-Step Illustrated Guide To Performing All Helicopter Flight Operations

Stanley Bell

·11.1k Followers· Follow

Published in Helicopter Maneuvers Manual: A Step By Step Illustrated Guide To Performing All Helicopter Flight Operations

4 min read

142 View Claps

19 Respond

Save

Listen

This comprehensive guide will provide you with everything you need to know about helicopter flight operations, from pre-flight planning to post-flight procedures. Whether you're a new pilot or an experienced professional, this guide will help you to improve your skills and knowledge.

Helicopter Maneuvers Manual: A Step-by-Step Illustrated Guide to Performing All Helicopter Flight Operations

by Ryan Dale

4.8 out of 5

Language	:	English
File size	:	3805 KB
Text-to-Speech	:	Enabled
Screen Reader	:	Supported
Enhanced typesetting	:	Enabled
Print length	:	102 pages

Pre-Flight Planning

The first step in any flight operation is to plan your flight. This includes:

Determining your destination and purpose of flight
Checking the weather forecast
Filing a flight plan
Loading your aircraft
Conducting a pre-flight inspection

Determining Your Destination and Purpose of Flight

Before you can start planning your flight, you need to know where you're going and why. This will help you to determine the best route to take and the amount of fuel you'll need.

Checking the Weather Forecast

The weather can have a significant impact on your flight, so it's important to check the forecast before you take off. This will help you to avoid any potential hazards, such as thunderstorms or icing conditions.

Filing a Flight Plan

A flight plan is a document that provides information about your flight, such as your destination, route, and estimated time of arrival. Filing a flight plan is not required for all flights, but it is recommended for any flight that will be longer than 50 miles.

Loading Your Aircraft

Once you have planned your flight, you need to load your aircraft. This includes loading passengers, cargo, and fuel. It's important to ensure that the aircraft is loaded properly to avoid any weight and balance issues.

Conducting a Pre-Flight Inspection

Before you take off, you need to conduct a pre-flight inspection. This inspection will help you to identify any potential problems with the aircraft. The pre-flight inspection should include checking the following:

The engine oil level
The fuel level
The hydraulic fluid level
The tires
The lights
The controls

Taxiing

Once you have completed your pre-flight inspection, you can start taxiing the aircraft. Taxiing is the process of moving the aircraft on the ground. When taxiing, it's important to be aware of your surroundings and to obey all ground traffic regulations.

Takeoff

The takeoff is the most critical phase of any flight. When taking off, it's important to follow the correct procedures and to maintain a safe airspeed.

Takeoff Procedures

The takeoff procedures will vary depending on the type of helicopter you're flying. However, the general steps are as follows:

Increase the engine power to takeoff power
Raise the collective to lift the helicopter off the ground
Maintain a safe airspeed
Climb to a safe altitude

Hovering

Hovering is the process of maintaining a constant altitude and position in the air. Hovering is used for a variety of purposes, such as landing, taking off, and performing aerial maneuvers.